Concrete is a mixture that is 7 to 15% cement and 60 to 75% aggregates. Since this mixture is so low-cost and durable, it makes up large sections of buildings and infrastructure pieces. You’ll also often find it used for floors.
The problem is that concrete, just like a lot of things, wears down over time. When it’s bare, it wears down even faster. This is why many concrete floors have a concrete coating.
You may own a home with concrete floor coatings. If so, you’re probably wondering how you can take care of it. This article will give you some concrete floor coating maintenance tips.
Read on!
Interior Decorative Concrete Coating
The maintenance you need to perform depends on the concrete floor coating location. An interior concrete floor will likely only see light foot traffic over time. So you don’t need to perform intense maintenance, but some maintenance is necessary.
Dust Mopping or Broom Sweeping
You must keep a routine of dust mopping or broom sweeping your concrete floor coating. This will prevent dust and dirt from piling up and destroying your floor.
Damp Mopping
Mopping with a damp mop is a good way to help concrete coatings maintain their shininess. However, be careful with the products you use. You need to get a pH-neutral cleaner and dilute it in water.
Also, don’t let the water puddle or let the cleaning solution get too dirty. This can make your floor turn out worse.
Exterior Decorative Concrete Coating
Broom sweeping is a good idea for exterior concrete floor coatings as well. You can also use a pressure washer to get rid of any dirt. Beyond that, there are some special steps you should take for exterior concrete coatings.
Resealing the Concrete
An exterior concrete coating will likely take a beating from the elements and vehicle traffic. So it’s a good idea to reseal your concrete every two to three years. This will keep the coating strong and help it maintain its luster.
Avoid Deicing Salts
Deicing salts are a great tool when winter comes around. Homeowners can use these salts to rid their driveway of slippery ice. The problem is that these salts can cause damage to concrete floor coatings.
The freezing and thawing cycles these salts cause can stress out your concrete floor coating. So if you want your concrete floor coating to stay strong, you have to put up with the slipperiness.
Spills
Concrete coatings should stop stains from hanging around. But it’s still a good idea to clean up stains as soon as you spot them.
Don’t Get Epoxy Coating for Concrete Floors
Concrete floor coatings are affordable, but you don’t want to get a new concrete coating every few months or so. That could get pricey. It’s better to take care of your concrete floor coatings so that they last.
If you don’t have concrete floor coatings yet, let us give you some advice. Don’t get an epoxy floor coating. Polyurea floor coatings, like the ones we offer, offer far more.
Learn more about it on this page.